Simpro Multi-Tip MT1600B, Руководство пользователя

Страница: 24 / 48

4.3 Operation of controls
All personnel using the machine must know how to correctly operate the controls.
Incorrect operation may result in a safety hazard or damage to the machine.
A small number of machines have customised or non-standard controls, which are
provided with their own operating instructions in a separate document.
The Multi-Tip controls are designed to allow simple, safe and fast operation of the electro-
hydraulic systems.
1. Before operation, check that the machine is stable and safe to use as per Section 4.1 .
2. Place the full bin on the cradle, taking care that it is properly positioned as per
Section 4.2 .
3. Standing at the operator controls, simultaneously press the SAFETY button under the
left side of the shroud, and the RAISE button under the right side of the shroud. Hold
both buttons down until the bin reaches the inverted position, then release.
4. Wait for the contents of the bin to empty.
5. Simultaneously press the SAFETY button and the LOWER button, holding both down
until the cradle rests on the ground.
6. Remove the empty bin as per Section 4.2 .
7. Repeat from step 2) as required.