INITIAL CONFIGURATION
NOTE:
In order to completely configure the Scheduler-Timer it is necessary to know the Network
ID, Device ID(s) and Scene-Link ID(s) to be controlled. Writing down the Device ID or Scene-Link
ID for each UPB device to be scheduled is recommended. The ID information is found in the
UPStart network file. Or, if Pre-Configured Kits are being used (e.g. DKIT-01) the network ID is
250 and each device is labeled with its ID number (e.g. 001, 002, 003, etc…).
With the UCS plugged into power on a configured UPB network, press
MENU
from the Idle Screen.
The following menu selections are available:
MAIN MENU
TOOLS SUB-MENU
1) Set Event
6) Set Randomness
A) CIM Mode
F) Noise View
2) Set Time
7) Link Mode
B) Add Device
G) Noise Log
3) Set Location
8) Tools
C) Add Link
H) Clock Source
4) Set Network
D) Delete Link
I) Set Contrast
5) Delete Events
E) Read Link
J) Use Repeater
Step A: Set Time
Press the Down button to select Set Time.
Press
ENTER
button to view the Set Time screen.
·
Move cursor with Right and Left buttons to select character to change.
·
Use Up and Down buttons to change character.
·
Adjust time by hours and minutes, Up or Down from character on the display.
·
Use the Right button to select the Schedule Mode field, then use Up or Down buttons to
select [OFF], [RUN], [VAC] or [ALT]. The Scheduler-Timer will be turned ON by selecting
either run [RUN], vacation [VAC] or alternate [ALT] vacation mode. Choose [RUN] for normal
Schedule Mode operation. See page 8 for a description of Schedule Mode operation.
·
Adjust month / day / year and day of the week, similarly.
·
When the time, mode, date and day of the week have been set, press the
ENTER
8
button
to save the settings.
8
1)Set Events
2)Set Time
[RUN]
03:50PM
05/09/06 Tue
NOTE:
Pressing the MENU button instead of the ENTER
will exit the screen without
saving the settings.
8
button
6
Controller, Scheduler-Timer
Model UCS-01
