CN-Series Hardware Installation and Maintenance Guide
Task 4—Connecting the Network Cables
Related Topics
Task 4—Connecting the Network Cables
Each CN-Series system includes four network interfaces that are required for OmniCube Federation
networks. These interfaces are labeled 1 to 4, from left to right. Network interfaces 1 and 2 are 10GbE,
(SFP) and network interfaces 3 and 4 are 1GbE, as shown in the following image.
Other networking interfaces are:
• Each CN-Series system has a separate 1GbE IPMI network interface that you can use for the initial
system setup and remote management.
• The CN-3000 and CN-5000 support an optional 1GbE or 10GbE network interface for guest VM use.
To connect network cables:
1.
Obtain the network cables needed for the network configuration.
2.
Connect the cables according to the guidelines required for your network configuration.
Related Topics
10GbE-Only Network Configuration
Direct-Connected Storage Network Configuration
26
