SimpliFire SF-SCT43-BK, Руководство по обслуживанию

Страница: 3 / 8

3
SimpliFire • SF-SCT43-BK, SF-SCT55-BK Service Manual • 2043-960 • 7/20
Figure 6 Side Glass Panel Removal
= SCREWS
BRACKETS
Glass Side Panels Removal / Replacement
1. Remove glass, see Glass Front Replacement
instructions.
2. Remove media/logs from ember bed.
3. Remove spotlight LED, see Spotlight LED
Replacement instructions.
4. Remove screws (4) and brackets (2) holding each of
the side panels. See Figure 6.
5. Tilt the top of the side glass panel inward to remove
from the appliance.
6. Replace the side glass panel, sliding the side glass
panel as far back as possible, and reinstall the
brackets, see Figure 6.
7. Reinstall spotlight LED.
8. Reinstall media/logs.
9. Reinstall Glass Front per Glass Front Replacement.
LED Spotlight Replacement
1. Remove glass, See Glass Front Replacement
instruction.
2. Support the Spotlight LED and remove the (3)
screws holding it in place. See Figures 7 and 8.
3. Gently pull the Spotlight LED cable located on the
right end of the Spotlight LED until the connector is
visible. Disconnect the connector and remove LED.
See Figure 9.
4. Connect the new Spotlight LED to the connector and
feed the cable back into the cutout. See Figure 9.
5. Re-install Spotlight LED screws.
6. Re-install glass per Glass Front Replacement.
Figure 7 Spotlight LED Location
Figure 8 LED Spotlight
Figure 9 LED Spotlight Connector
CONNECTOR CONNECTOR
SPOTLIGHT LED SPOTLIGHT LED
SPOTLIGHT LED SPOTLIGHT LED