SimpliFire SF-INS30-BK Скачать руководство пользователя

Страница: 14 / 16

SimpliFire • SF-INS30-BK • 2042-980 Rev. B • 12/18

A. Maintenance

WARNING! Risk of Shock! Always unplug the cord be-

fore moving or servicing. Do not immerse appliance in

water.

•

Always turn OFF the appliance and disconnect the

cord from the electrical outlet before cleaning your

appliance.

• Light accumulated dust may be removed from the ap-

pliance with a soft cloth or vacuum cleaner.

• Wipe the exterior surfaces of the appliance occasion-

ally with a slightly damp cloth using a solution of mild

detergent and water. Dry thoroughly before operating

the appliance.

CAUTION! Do not allow water to run into the interior of

the appliance as this could create a fire or electric shock.

Always disconnect electrical service before serving ap-

pliance.

•

The fan motor is factory lubricated for life and will not

require further lubrication.

• Store appliance in a clean dry place when not in use.

WARNING! Risk of Fire! To reduce risk of fire, do not

store or use gasoline or any other flammable vapors or

liquids in the vicinity of the appliance.

WARNING! Risk of Electrical Shock! Any other servic-

ing needed must be performed by an authorized service

technician. Do not attempt to service the unit yourself.

B. Cleaning

Cleaning Glass

ust particles can be removed by buffing lightly with a

clean dry cloth. Fingerprints and other marks can be

cleaned with a cloth dampened with a quality household

glass cleaner.

The glass should be completely dried with

a lint free cloth or paper towel. Do not use abrasive clean-

ers on glass surface. Do not spray liquids directly onto

any surface.

Metal Surface

ust particles can be removed by buffing lightly with a

clean dry cloth. A damp cloth can be used to clean paint-

ed surfaces. Do not use abrasive cleaners. Do not spray

liquids directly on to any surface,

MAINTENANCE

C. Servicing

Except for installation and cleaning described in this man-

ual, an authorized service technician should perform any

other servicing.

WARNING! Risk of Electrical Shock! Any other servic-

ing needed must be performed by an authorized service

technician. Do not attempt to service the unit yourself.

Содержание SF-INS30-BK

















Результаты поиска

Содержание SF-INS30-BK

Отзывы:

Похожие инструкции для SF-INS30-BK

Бренды по названию

Популярные бренды

SimpliFire SF-INS30-BK, Руководство пользователя

Результаты поиска

Содержание SF-INS30-BK

Отзывы:

Похожие инструкции для SF-INS30-BK

Бренды по названию

Популярные бренды