17
SimpliFire • SF-FORMAT36 • 2042-950 Rev. B • 10/21
3. Before installing the top mantel, bend the mounting
tabs slightly into a more open position to allow for
clearance while installing the mantel. See Figure 3.
Figure 3
MOUNTING TAB
4. Slide the top mantel section onto the appliance See
Figure 4.
Figure 4
TOP MANTEL
5. Once the top mantel is in place, bend the the mounting
tabs at a 90° angle so it is flush against the inner
surface of the appliance.
6. Secure the top mantel to the appliance using two (2)
M5X12 thumb screws with rubber washers. See Figure
5.
Figure 5
M5*35 PHILLIPS
SCREWS and WASHERS
M5X12 THUMB
SCREWS WITH RUBBER
WASHERS
SF-FM50-WH and SF-FM60-WH Installation
1. Slide the bottom mantel section onto the appliance
and connect the bottom mantel wire connection to the
appliance wire connector protruding from the bottom
of the appliance (the cover plate on the bottom of the
appliance may need to be removed to access the wire
connector). See Figure 6.
2. Fasten the bottom mantel section to the appliance with
two (2) M5*35 Phillips screws. See Figure 10.
Figure 6
