15
SimpliFire • SF-ALL48-BK, SF-ALL60-BK • 2040-981 Rev. C • 3/18
F. Appliance Final Setup
1. Carefully spread the small crystal stones across the
ember bed. Then evenly arrange the larger crystal
stones along the inset window ledge at the front of
the firebox.
Figure 4.15 Stone Installation
2. Install front panel. Locate the J-hooks on the back
side of the glass on the four shoulder bolts on the
appliance opening. Engage the shoulder bolts.
See Figure 4.16.
3. Press down on top edge of glass to fully engage J-
hooks on the shoulder bolts.
Note:
Make sure the glass is fully attached to the fire-
box so that the control panel can work properly.
Figure 4.16 Glass Front Installation
CAUTION!
Two adults are recommended for the
installation of glass front.
Use caution when handling
glass. Failure to do so could result in personal injury or
property damage.
4. Thread the two (2) ST3X8 screws into the threaded
holes on the glass panel. Check the alignment of
the glass panel and securely tighten the screws. See
Figure 4.17.
Figure 4.17 Secure Glass Front
Note:
If optional logs are purchased, arrange the logs
on top of the crystal stones as desired.
