Simplicity Massey Ferguson Agco Allis 1692934, Руководство оператора

Страница: 18 / 21

14
Snowthrower & Hitch Removal
SNOWTHROWER & HITCH REMOVAL
NOTE: Whenever removed, install clevis pins, hitch pins,
clips and hardware onto snowthrower and hitch for stor-
age.
1. Fully lower the attachment lift.
2. See Figure 30. Disconnect the drive shaft by pulling
back on the locking collar (A) and then pulling the
shaft off.
3. See Figure 34. Disconnect the attachment electrical
connection.
4. See Figure 31. Remove the hardware securing the
remote deflector control, and remove the control.
5. See Figure 32. Disconnect the snowthrower lift rod
(B) from the hitch lift arm (E).
6. See Figure 33. Remove the 4 safety clips and clevis
pins (B) securing the snowthrower to the tractor and
lift the snowthrower off the attachment hooks (C).
7. See Figure 32. Disconnect the lift rod (F) from the lift
extension (H).
8. See Figure 32. Remove the clevis pins (A) attaching
the front and rear of the hitch to the tractor. Remove
the hitch.
9. If the mower deck is being installed, remove the lift
extension (H, Figure 32).
Figure 30. Remove the Drive Shaft
A. Locking Collar
Figure 32. Hitch Removal
A. Clevis Pin
E. Hitch Lift Arm
B. Snowthrower Lift Arm F. Lift Rod
C. Safety Clip G. Front Hitch Bracket
D. Ladder Hitch H. Lift Extension
A
C
D
E
F
G
H
B
A
C
Figure 34. Attachment Electrical Connection
Figure 33. Attach Snowthrower
A. Dozer Pins
C. Attachment Hooks
B. Clevis Pin
A
B
C
A
Figure 31. Remote Defector Control
A. Remote Deflector Control
B. Deflector Cable Support Arm
A
B