background image

2

Read and obey all operation and warning decals.

ROTATING
BLADES

SHUT OFF MOWER
AND TRACTOR
BEFORE SERVICING
OR CLEANING BLOWER
AND MOWER.

DANGER

1700259

Safety Rules
& Information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of
unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. 

This mow-

ing deck is capable of amputating hands and feet and throwing objects.

The triangle         in text signi-

fies important cautions or warnings which must be followed.

GENERAL WARNINGS

Know the tractor controls and how to stop quickly.
READ THE TRACTOR OPERATOR’S MANUAL.

Read and obey all safety decals.

Only allow responsible adults, who are familiar with
the instructions, to operate the unit.

Disengage the electric clutch (PTO). Shut off the
engine and wait for all moving parts to stop before
attaching, adjusting, or disconnecting any part of the
collection system.

Check the collection system to make sure it is bolted
tightly to the tractor.

DO NOT operate the mower without either the entire
grass catcher or the deflector in place.

Turn off the PTO switch to disengage the blades
when not mowing.

DO NOT mow in reverse. Always look down and
behind before and while travelling in reverse.

DO NOT turn sharply when travelling alongside a
building or any object. Slow down before turning.

DO NOT carry passengers on the tractor.

When blower assembly is removed from the mower
deck, the deflector must be properly installed.

If the mower stalls or the turbo blower chute plugs: 

1. disengage the electric clutch (PTO);
2. stop the engine and remove the key;
3. set the parking brake, and wait for all moving parts

to stop.

4. Remove the foreign object or clear the chute with

a piece of wood before restarting the engine.

NEVER PLACE HANDS INTO BLOWER HOUS-
ING TO CLEAR JAMMED OBJECT. BLOWER
MAY ROTATE WHEN OBJECT IS REMOVED.

For added tractor stability and to prevent tipping or
loss of control:

a. Use reduced speed on uneven ground and when

turning corners.

b. Reduce loads on hillsides. It is recommended that

the collection system be kept only half full when
negotiating any slopes. Start mowing on slopes
when the collection system is empty.

c. Mow up and down the face of slopes; never

across the face of any slope.

When operating on slopes, use front counterweights.
On slopes over 15% (8.5°),  use two rear wheel
weights in addition to front counterweight.

Never

operate on slopes greater than 30% (16.7°). 

SAFETY DECALS

This unit has been designed and manufactured to pro-
vide you with the safety and reliability you would expect
from an industry leader in outdoor power equipment
manufacturing.

Although reading this manual and the safety instructions
it contains will provide you with the necessary basic
knowledge to operate this equipment safely and effec-
tively, we have placed several safety labels on the unit to
remind you of this important information while you are
operating your unit.

All  DANGER,  WARNING,  CAUTION  and instructional
messages on your rider and mower should be carefully
read and obeyed. Personal bodily injury can result when
these instructions are not followed. The information is for
your safety and it is important! The safety decals below
are on your rider and mower.

If any of these decals are lost or damaged, replace them
at once. See your local dealer for replacements.

These labels are easily applied and will act as a constant
visual reminder to you, and others who may use the
equipment, to follow the safety instructions necessary for
safe, effective operation.

Warning Decal - 
P/N 1700259

Danger Decal - P/N 1704277

Danger Decal -
P/N 1704276

Содержание 1694497













Отзывы: