Simplicity 1692924, Руководство оператора

Страница: 14 / 20

10
Figure 13. Drawbar Bolts & Washers
Capscrews &
Washers
Figure 14. Rear Hitch Brackets
A. Bracket
B. Washer, 5/8
C. Capscrew, 5/8-11 x 2”
Figure 15. Attachment Lift Extension
A. Lift Arm
B. Lift Extension
C. Carriage Bolt, 3/8-16x1”
A
B
C
A
B
C
Front
Front
Install Rear Hitch Mounting Brackets
1. Remove the front four capscrews and washers secur-
ing the drawbar to the transmission (see Figure 13).
2. Attach the rear hitch brackets (A, Figure 14) to the
drawbar and transmission with the 5/8-11 x 2” cap-
screws (C) and washers (B) provided.
NOTE: During initial installation do not tighten the cap-
screws (C, Figure 14) securing the rear hitch mounting
brackets until the attachment is completely installed.
Install Attachment Lift Extension
NOTE: The attachment lift extension (B, Figure 15) must
be removed when using mower.
1. Install the attachment lift extension (B, Figure 15) on
the left attachment lift arm (A) using two 3/8-16 x 1”
carriage bolts (C), lockwashers, and nuts as shown.
Initial Setup & Assembly