Simplicity 1692912, Руководство оператора

Страница: 20 / 44

16
00
Regular
Maintenance
MAINTENANCE SCHEDULE & PROCEDURES
The following schedule should be followed for normal care of your rider and mower. You will need to keep a record of
your operating time. Determining operating time is easily accomplished by multiplying the time it takes to do one job
by the number of times you’ve done the job, or you can install the optional hour meter.
Before Before Every Every Every Spring
SAFETY ITEMS First Use Each Use 5 Hours 25 Hours 100 Hours & Fall
Check Safety Interlock System
● ●
Check Rider Brakes
● ●
Check Mower Blade Stopping Time
● ●
Before Before Every Every Every Spring
NORMAL CARE ITEMS First Use Each Use 5 Hours 25 Hours 100 Hours & Fall
Check Rider/Mower for loose hardware
● ●
Check Engine Oil Level *
● ● ● ●
Check Engine Air Filter *
●
***
●
Change Engine Oil & Filter *,** ***
●
Every 50 Hours ***
●
Lubricate Rider & Mower ***
●
Check Tire Pressure
●
***
●
Check Transmission Fluid
●
***
●
Check Fuel Filter
●
Clean Battery & Cables
●
Clean & Sharpen Mower Blades
●
Inspect/Replace Spark Plug *
●
* See the engine manufacturer's owner's manual.
** Kohler Models: Change original engine oil after first 5 hours of operation.
Briggs & Stratton Models: Change original engine oil after first 8 hours of operation.
*** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
Tire Pressure
Front 20 psi (138 kPa)
Rear 10 psi (69 kPa)
Figure 19. Checking Tire Pressure
CHECK TIRE PRESSURES
Tire Pressure should be checked periodically, and main-
tained at the levels shown in the chart. Note that these
pressures may differ slightly from the “Max Inflation”
stamped on the side-wall of the tires. The pressures
shown provide proper traction, improve cut quality, and
extend tire life.