manualshive.com logo in svg

Simplicity 1692912, Руководство оператора

Поделиться
Скачать
Simplicity 1692912 Скачать руководство пользователя страница 9

5

Safety Decals

SAFETY DECALS

This unit has been designed and manufactured to pro-
vide you with the safety and reliability you would expect
from an industry leader in outdoor power equipment
manufacturing.

Although reading this manual and the safety instructions
it contains will provide you with the necessary basic
knowledge to operate this equipment safely and effec-
tively, we have placed several safety labels on the unit to
remind you of this important information while you are
operating your unit.

All  DANGER,  WARNING,  CAUTION  and instructional
messages on your rider and mower should be carefully
read and obeyed. Personal bodily injury can result when
these instructions are not followed. The information is for
your safety and it is important! The safety decals below
are on your rider and mower.

If any of these decals are lost or damaged, replace them
at once. See your local dealer for replacements.

These labels are easily applied and will act as a constant
visual reminder to you, and others who may use the
equipment, to follow the safety instructions necessary for
safe, effective operation.

DANGER

ROTATING CUTTING BLADE

Do not put hands or feet

  under mower deck while

blade is rotating.

1704276

DANGER

ROTATING CUTTING BLADE

 

Do not operate mower

without deflector or entire

grass catcher in place.

1704277

Decal - Danger

Part No. 1704276

Decal - Danger

Part No. 1704277

AVOID SERIOUS INJURY OR DEATH

• READ OPERATOR'S MANUAL(S).
• KNOW LOCATION AND FUNCTION OF ALL CONTROLS.
• KEEP SAFETY DEVICES (GUARDS, SHIELDS, &
   SWITCHES) IN PLACE AND WORKING.
• REMOVE OBJECTS THAT COULD BE THROWN BY
   THE BLADE.
• DO NOT MOW WHEN CHILDREN OR OTHERS
   ARE AROUND.
• NEVER CARRY CHILDREN.
• LOOK DOWN AND BEHIND—BEFORE AND WHILE
   BACKING.
• AVOID SUDDEN TURNS.
• IF YOU CANNOT BACK UP A HILL
   — DO NOT OPERATE ON IT.
• GO UP AND DOWN SLOPES, NOT ACROSS.
• IF MACHINE STOPS GOING UPHILL, STOP BLADE
   AND BACK DOWN SLOWLY.
• BE SURE BLADE(S) AND ENGINE ARE STOPPED 
   BEFORE PLACING HANDS OR FEET NEAR BLADE(S).
• WHEN LEAVING MACHINE, SHUT OFF ENGINE, 
   REMOVE KEY, AND SET PARKING BRAKE.

WARNING

DO NOT TOW UNIT!

Damage may result to
drive mechanism.

OPERATION

To Start Engine

• Seat must be occupied.
• Clutch/Brake pedal must
    be depressed.
• PTO switch must be off.

Ignition Switch

OFF

RUN

START

Clutch/Brake

Pedal

Parking

Brake

Knob

       Parking Brake

To Set Parking Brake

• Pull knob up while Clutch/Brake
    pedal is depressed.
• Release Clutch/Brake pedal 
    while holding knob.

To Release Parking Brake

• Depress Clutch/Brake pedal.
• Push knob down while 
    Clutch/Brake pedal is depressed.

To Adjust Top Speed of Wheels

COLUMN KNOBS INDEPENDENTLY
CONTROL TOP SPEED OF
EACH WHEEL
• Turn knob clockwise to lower
    top speed of a wheel.
• Turn knob counter-clockwise to
    raise top speed of a wheel.
Lower speed of faster wheel until
vehicle travels in straight line when
both levers are in the MAXIMUM
forward position.

When Operator Leaves Seat

• Engine will shut off if Parking Brake is
    not engaged.
• Engine will shut off if PTO switch is on.

PTO Switch

To Operate PTO clutch

• The operator must be in seat.
• To engage PTO, pull switch up.
• To disengage PTO, push switch down.

ROTATING BLADES
CUT OFF ARMS
AND LEGS

STOP MOWER WHEN
CHILDREN ARE NEAR.

NO RIDERS
— THEY FALL OFF.

DANGER

DANGER

OPERATING ON
SLOPES CAN BE
DANGEROUS

SEE OPERATOR'S
MANUAL.

IF YOU CANNOT
BACK-UP A HILL
—DO NOT DRIVE ON IT.

1715993

Decal -  Operating Instructions

Part No. 1715993

Содержание 1692912













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды