SNOWTHROWER
Assemble Install Lift Lever Later
Models
NOTE: Use these instructions for mode/s equipped
with a one-piece lift /ever bracket
Figure
19).
NOTE: When installing the snowthrower on manual
lift mode/s, it
be necessary to install
lever kit,
no. 1691832.
NOTE: See inset Figure 19. is necessary to
remove the notch from the lift handle bracket
as shown to
the snowthrower to float
during
operation.
Refer to Figures 19 and 20.
Attach the lift bracket guide (A) to the quadrant
(B) using spacers (C), 5/16-18x
screws, lockwashers, and nuts. Do not tighten at
this time.
2. Assemble the quadrant
and bracket (E).
a . Depress the release button on the top of the
lift lever (D) and rotate until the lever latch
clears the quadrant.
b.
Separate the quadrant (B) and lift lever (D).
c .
Assemble the quadrant (B) and bracket (E).
d .
Insert the lift lever rod (D) through the right
side of the quadrant (B).
e .
Insert the lift lever rod (D) through the left side
of the quadrant (B) and the left side of the lift
bracket (E). See Figure 19 inset.
f . Fully insert the lift rod (D) through the quad-
rant and bracket, and lock the lever latch in
the quadrant
g Secure the bracket (E) to the lift lever(D)
using one
(F), two
washers (G), one
lo&washer(H),
and nut as shown in Figure 19.
3. Pry up the two rear plastic ratchet fasteners hold-
ing the footrest mat on the left and right foot rests
4. Install the pivot bracket
to the underside of the
left footrest using
6-18
and
nut.
5. Assemble the lift bracket (J) to the underside of
the right footrest using
8
capscrews
and nuts. Tighten securely.
6. Install the rear hitch bracket(K),
clips (L)
and large washers (M) on the lift lever rod (A).
7. Slide the pivot rod through the pivot bracket
and install the washer and hairpin clip.
6. Mount the quadrant (B) onto the lift bracket(J).
9. Tighten all capscrews. Be sure lift lever assem-
bly is securely clamped to the foot rest and the
lever latch is unobstructed.
NOTE:
bracket
until no end play exists.
Remove the notch from the lift handle
as shown in Figure 19.
A. Lift Bracket Guide
H. Lockwasher,
B. Quadrant
Pivot Bracket
c. Spacer
J. Lift Bracket
D. Lift Lever Rod
K. Rear Hitch Bracket
E. Bracket
L. Hair Pin Clips
F. Capscrew,
M. Large Washers
G. Washer,
