Simplicity 1692356, Руководство оператора

Страница: 10 / 26

Figure 10. Removing Mower Lift Assy.
A. Capscrew, Hex Hd.
G. Lift Arm Assy.
H. Lift Tube Assy.
Nut, I. Pivot Bracket
C. Lift Support J. Washer
D. Large Hairpin Clip K. Pin (short)
E. Washer L. Pin (long)
F. Shaft Assy.
INSTALLATION ELECTRIC LIFT
MODELS
Attaching Hitch To Tractor
See Figure 10. Remove the large hairpin clip (D)
and washer (E) from the left side of shaft assy.
(F). Pull shaft assy. out from right side.
NOTE: Parts H , K L not used when installing
snowthrower hitch but should be retained to
convert tractor back to mower operation,.
2. See Figure 11. Install shaft assy. (F) through lift
arm assy. (G), one washer (I), new rear support
assy. (H) and other washer
supplied in the kit.
3. See Figure 11. Secure the new rear support
assy. (H) between the two holes on the shaft
assy. (F) and the two washers hairpin
clips (J) supplied with the snowthrower.
4. See Figure Secure left end of shaft (F) to
pivot bracket (K) using original washer(E) and
large hairpin clip (D). Rear support assy. (H)
should hang down loose.
5. Slide hitch and snowblower assy. under tractor
so back plate of hitch assy. is under rear support
assy. (H, Figure 11).
wheels fully to the left. Lift front of
snowthrower hitch assy. and install it into the
tractor front hitch as shown in Figure 12.
40” SNOWTHROWER
Figure 11. Installing Rear Support Assy.
A. Capscrew, Hex Hd., G. Lift Arm Assy.
8 H. Rear Support
Nut, I . W a s h e r s ’
C. Lift J. Hairpin Clip
D. Large Hairpin Clip K. Pivot Bracket
E. Washer F. Shaft Assy.
*Supplied with
Figure 12. Attaching Hitch to
Tractor Hitch
Hitch Brackets c. Spacer
B. Rod, Latch D. Safety Clip
7. See Figure 12. Install the rod, latch (B),
spacer(C) and hairpin clip (D) supplied with
snowthrower.
6