9
of 12
Description of Functions and Operation
How the room temperatur controller can be used.
Change temperature until next switching event
> see
keys + – in AUTO
Controlling the temperature according to pre-set profiles
> see
main menu, AUTO
Set a constant temperature (manual operation)
> see
main menu, MAN
Set temperature for a number of hours
> see
main menu, TIMER
Set temperature for a specific date
> see
main menu, HOLIDAY
Use a separate program for special days
> see
main menu, AT HOME
Adjust the controller to personal needs
> see
main menu, USER SETTINGS
Adjust the controller to application needs
> see
main menu, INSTALLER SETTINGS
Keys
to confirm / activate
+ – in AUTO (-)
Set temperature temporarily until next switching event. Indicated by „-“
behind
AUTO-.
First key-press shows set value, following ones change it.
OK
+ – in menu
Scroll through the menu
OK
Accepts modification / selection
Info
Show related details in
AUTO, MAN, TIMER, HOLIDAY, AT-HOME
.
To cancel press key again.
Menu
Enter menus. + – key to move
Go one step back
for 10 sec.
Switch off connected load. Display shows
OFF
. Details see G4
Main Menu
to confirm / activate
A MENU
Use
+ –
keys
in order to navigate through the menu
B AUTO
The temperature will be controlled automatically according to the time
and temperature of the selected program, see G1. Use
+ – keys
to
change temperature until next switching event.
OK
C MAN
The temperature will be controlled continuously according to the tem-
perature set in this menu. Use
+ – key
to change temperature.
OK
D TIMER
The temperature will be controlled temporarily according to the hours
and temperature set in this menu. On terminating
TIMER
mode, the pre-
viously active mode will be re-activated.
HOLIDAY
terminates
TIMER
.
OK
E HOLIDAY
The temperature will be controlled between the dates and the tempe-
rature set in this menu.
HOLIDAY
starts at 0 h of the first day, it ends at
24 h of the last day. In the period of time before
HOLIDAY
starts,
AUTO
will be active. While waiting for holiday start date, other mode can be
selected
(AUTO, MAN, TIMER, HOME)
.
INFO
provides details of the
pending holiday. In this situation holiday period will start automatically
when the DATE FROM occurs. When holiday ends it returns to the mode
which was in place before activating
HOLIDAY
.
OK
F AT HOME
The temperature will be controlled automatically according to the time
and temperature of the program configured here (independent from
AUTO
). The program is the same for all days. Monday‘s program is used
as the pre-set. It needs to be terminated by user, e.g, by selecting
AUTO
.
Usage: for holiday at home, illness etc.
OK
G USER SETTINGS
Customise the controller according to personal requirements
OK
H INSTALLATER
SETTINGS
Customise the controller according to application requirements
(from installer only)
OK
