Section 6: Telnet Command Map
This section covers how to configure the Simplex Ethernet Clock once it has
been installed. Once you have established a Telnet connection, log on
using the following User ID and Password:
User ID:
iclock
Password:
timely
After logging on, configure the clock using the following commands.
Command Description
?
Prints help
Arp
Displays the ARP cache
config
Displays the contents of the clock configuration file
Date
Allows a manual date/time set
date [MMDDYYYYHHMMSS]
Display or set system time information in UTC.
Setting the date must be in the form of:
MMDDYYYYHHMMSS<am | pm>
Example: to set March 17, 2001 3:35:23
date 03172001033523pm OR date 03172001153523
Time values should always be in UTC(GMT
display
Used to Configure and display the clock's format
settings.
•
[-t 12|24] Specify whether time is
displayed in 12-hour or 24-hour format.
•
[-s on|off] Specify whether seconds should
be shown. This is only applicable on a six
digit display.
•
[-p on|off] Specify whether to display the
AM/PM indicator. The indicator is a light
in the upper left corner during PM hours.
For a six digit display and seconds off,
the seconds numerals will display A(AM) or
P(PM).
•
[-c on|off] Specify whether to display the
colon between hours and minutes.
©2007 Simplex Time Recorder Co. All rights reserved.
Page 16
