Simpact Freeway 1100, Руководство по установке оборудования

Страница: 46 / 70

46 DC 900-1370E
Freeway 1100/1150 Hardware Installation Guide
You can change the default FTP user name and FTP password that the Freeway
uses by changing the corresponding boot parameters on the Freeway system. If
you do, remember that you must also change the user name and password of the
FTP account on the boot server.
4. The system administrator has assigned the following device names and addresses
in the UNIX
/etc/hosts
file, the Windows NT
hosts
or
lmhosts
file, or using
your VMS TCP/IP package:
•
Freeway server name and Internet address
•
Boot server name and Internet address
•
Gateway Internet address (if applicable)
The procedure for configuring the boot parameters is the same for UNIX, VMS, and
Windows NT systems. Freeway obtains the boot parameters from local non-volatile
memory during system boot. Therefore, when you configure the boot parameters in the
following steps, all applicable parameters must be configured.
Step 1:
The boot parameter initialization disk is a DOS-formatted floppy disk. Insert it in any
PC. The
bootparm.txt
file, shown in Figure 3–1 , can be viewed with any text editor. Edit
this file to configure the boot parameters as described in Table 3–1 . Be sure to select the
appropriate option to save this file as text if this is not the default format of your editor.
Boot Device
has extra info
for ISA boards;
rest of table
matches
3100/3150.