Simpact Freeway 1100, Руководство по установке оборудования

Страница: 15 / 70

DC 900-1370E 15
Safety Precautions
English
Be sure to take the following safety precautions during installation and maintenance of
the Freeway communications server:
•
Observe the warnings and directions printed on the Freeway server and its asso-
ciated equipment.
•
Check the electrical rating label on the Freeway chassis. Be sure that the voltage
and frequency of your power source match this rating.
•
The Freeway server must be plugged into a grounded, three-wire power outlet.
Do not use an adapter that permits a three-wire electrical cord to be plugged into
a two-wire power outlet.
•
Use appropriately rated extension cords or power strips only.
•
To ensure proper cooling, always operate the Freeway server with its covers in
place. Do not cover or block any of the openings on the Freeway chassis. Do not
place the unit near a heater.
•
Do not insert objects through openings in the Freeway chassis. Doing so could
result in a short circuit that might cause a fire or an electric shock.
•
Do not modify the Freeway equipment in any way. Simpact, Inc. is not responsi-
ble for regulatory compliance of any Freeway communications server that has
been modified. Altering the Freeway enclosure in any way other than the installa-
tion of Simpact-provided options may invalidate Freeway’s safety certifications.