Simpact Freeway 1100, Руководство по установке оборудования, Страница: 45 / 70

DC 900-1370E 45
Chapter
3
Configuring the Boot
Parameters using the
Initialization Disk
This chapter describes how to use the boot parameter initialization disk to configure the
boot parameters and boot the Freeway server. You can boot Freeway from a boot server
attached to the local area network or from the Freeway’s hard or flash drive. If you are
booting from a boot server, it is assumed that:
1. You have performed the hardware installation procedures described in Chapter 2 .
2. You know which protocol you will be installing on your boot server (for example,
BSC2780/3780, FMP, or X.25). The protocol is indicated on the label of the
software distribution media.
Note
If you are installing more than one protocol, it is best to perform
the software installation (described in the
Freeway User’s Guide )
and loopback verification testing (described in the Loopback Test
Procedures ) for one protocol before attempting to customize your
Freeway system for multiple protocols.
3. The system administrator has set up a file transfer protocol (FTP) or remote shell
(RSH) user name and password on the boot server to match the FTP user name
and the FTP password in the Freeway system boot parameters. The default FTP
user name is
ff f frr r ree e eee e eww w waa a ayy y y
and the default FTP password is
pp p paa a ass s sss s sww w woo o orr r rdd d d
.
Item 2 is in
FW docs only;
you don’t even
have to edit
load files for
SR.