SimonsVoss SI.SmartHandle AX A0 Скачать руководство пользователя страница 8

Страница: 8 / 165

Damage resulting from liquids

This product contains electronic components that may be damaged by liquids of any kind.



Keep liquids away from the electronics.

Damage resulting from aggressive cleaning agents

The surface of this product may be damaged as a result of the use of unsuitable cleaning agents.



Only use cleaning agents that are suitable for plastic or metal surfaces.

Damage as a result of mechanical impact

This product contains electronic components that may be damaged by mechanical impacts of
any kind.

1. Avoid touching the electronics.

2. Avoid other mechanical influences on the electronics.

Damage due to polarity reversal

This product contains electronic components that may be damaged by reverse polarity of the
power source.



Do not reverse the polarity of the voltage source (batteries or mains adapters).

Failure of operation due to different discharged batteries

This product uses one or more batteries for power supply. The batteries are discharged at ap-
proximately the same rate.



Always replace all batteries at the same time.

Operational malfunction due to radio interference

This product may be affected by electromagnetic or magnetic interference.



Do not mount or place the product directly next to devices that could cause electromagnetic
or magnetic interference (switching power supplies!).

Communication interference due to metallic surfaces

This product communicates wirelessly. Metallic surfaces can greatly reduce the range of the
product.



Do not mount or place the product on or near metallic surfaces.

NOTE

Intended use

SimonsVoss-products are designed exclusively for opening and closing
doors and similar objects.



Do not use SimonsVoss products for any other purposes.

SmartHandle AX

SmartIntego

(Manual)

3. General safety instructions

8 / 165

Содержание SI.SmartHandle AX A0






































































































































































Результаты поиска

Содержание SI.SmartHandle AX A0

Отзывы:

Похожие инструкции для SI.SmartHandle AX A0

Бренды по названию

Популярные бренды

SimonsVoss SI.SmartHandle AX A0, Руководство пользователя

Результаты поиска

Содержание SI.SmartHandle AX A0

Отзывы:

Похожие инструкции для SI.SmartHandle AX A0

Бренды по названию

Популярные бренды