TRANSPONDER TERMINAL
MANUAL
9
6.0 OPERATION
To ensure that the transponder is programmed correctly without any errors, you must
place the transponder in the transponder bracket (1) and not hold it in your hand or
place it on top of the housing. The bracket holds the transponder in a position where
the range and alignment are optimally matched. The transponder bracket (1) is at-
tached to the right-hand side of the housing.
Please proceed as follows when operating the transponder terminal:
•
Position transponder in the transponder bracket (1) with the key ring pointing
downwards
•
Press event button (2) on the right-hand side of the housing
•
Follow the instructions on the display (3)
Do not remove the transponder until the programming process is complete, otherwise
this may lead to incorrect programming and malfunctions at the door. The display will
indicate when programming is complete.
3
1
2
