IMPORTANT
Take voltage drop into account
The resistance in copper produces a voltage drop, the size of which de-
pends on the cable gauge, current flow and cable length. The power supply
lines must be adequately dimensioned.
1. Ensure that the cable gauge in lines is adequate for power supply. Use
another suitable cable where necessary.
2. If required, merge wire pairs to increase the cable gauge.
3. Use a power source located closer to the SmartOutput module if
needed.
4. If possible, increase the supply voltage (observe technical
specifications).
SOM + SREL3.ADV
(Manual)
12. Technical specifications
24 / 27