Simons Voss Technologies SmartRelay SREL Series, Руководство пользователя

Страница: 12 / 38

IMPORTANT
Do not use switched-mode power supplies near SmartRelays.
3.4 Determining installation position
The transponder transmission range for SmartRelay (read range) is a max.
of 1.5 m, but may be reduced in environments containing metals, especially
in magnetic fields or where aluminium is present.
Ideally, you should perform a read range test with an authorised
transponder and a battery-powered SmartRelay.
3.5 More information

All cabling used to connect SmartRelay should be type IY(ST)Y ....x0.6
– twisted pair, shielded cable – and should not exceed 100m in length.
Power losses should be taken into account when dimensioning the
power supply.

The technical data regarding inputs and outputs are to be taken into
account (see Technical Data).

All cabling must be installed and connected as per VDE regulations
(VDE = German Association of Electro-technology, Electronics &
Information Technology).
SREL1+2 (Manual)
3. General
12 / 38