18
Recommendations
•
Before cleaning any surface, an inconspicuous
area should be cleaned to test spray pattern
and distance for maximum cleaning results.
•
Take care when using high-pressure setting as
it can potentially damage the finish or paint.
•
If painted surfaces are peeling or chipping,
use extreme caution as pressure washer may
remove the loose paint from the surface.
•
The best angle for spraying high-pressure
water against a cleaning surface is 45°.
Spraying directly head-on tends to cause dirt
particles to embed in the surface.
Deck Cleaning
With Detergent: Fill detergent bottle with
Deck/Fence Cleaner (39-4577-4). Place deter-
gent suction tube directly into cleaning solution
and apply to surface at low-pressure. For best
results, limit your work area to smaller sections
of approximately 25 sq.ft. Allow Deck Wash to
remain on surface 1 to 3 minutes. Do not allow
detergent to dry on surface. Rinse at high-pres-
sure in a long sweeping motion keeping the
spray nozzle approximately 6” from the cleaning
surface. Always clean from top to bottom and
from left to right. When moving on to a new sec-
tion of the cleaning surface, be sure to overlap
the previous section to eliminate stop marks and
ensure a more even cleaning result.
Without Detergent: Pre-rinse cleaning surface
with fresh water and wash with water on
high-pressure using same directions as above.
House Siding
With Detergent: Fill detergent bottle with
House/Siding Cleaner (39-4576-6). Place deter-
gent suction tube directly into cleaning solution
and apply to surface at low pressure (for best
results, limit your work area to sections of
approximately 6’ and always apply detergent
from bottom to top). Allow detergent to remain
on surface 1–3 minutes. Do not allow detergent
to dry on surface, if surface appears to be dry-
ing, simply wet down surface with fresh water.
Rinse at high-pressure from bottom to top, then
top to bottom in an even sweeping motion keep-
ing the spray nozzle approximately 6” from the
cleaning surface.
Without Detergent: Pre-rinse cleaning surface
with fresh water and wash with water on
high-pressure using same directions as above.
Cement Patios, Brick & Stone
With Detergent: Fill detergent bottle with
Heavy-duty Degreaser (39-4578-2). Place deter-
gent suction tube directly into cleaning solution
and apply to surface at low-pressure. For best
results, limit your work area to smaller sections
of approximately 25 sq.ft. Allow degreaser to
remain on surface 1–3 minutes. Do not allow
detergent to dry on surface. Rinse at high-pres-
sure in a sweeping motion keeping the spray
nozzle approximately 3–6” from the cleaning
surface. Always clean from top to bottom and
from left to right.
Without detergent: Pre-rinse cleaning surface
with fresh water and wash with water on
high-pressure using same directions as above.
TIPS ON CLEANING WITH YOUR PRESSURE WASHER
Содержание S1900
Страница 24: ......
