GENERAL NOTES
MANUAL COMPILATION
This manual provides detailed information on the SB2000 base station including
General Description, Installation and Operation, Options, Technical Description,
Alignment and Testing, Fault Finding Procedures, and Superseded Technical
Information.
Details of both “basic” and “optional units” have been included in this Technical
Manual, therefore, some material may not be relevant to every system. Configuration
is dependent upon the specification by the customer when the equipment was ordered
and installed.
The manual has been compiled with a two-tier maintenance policy in mind, i.e. first-
line fault location and repair by replacement, followed by subsequent bench-testing of
sub-assemblies to specification. Consequently, some “overlap” and/or duplication of
information has resulted.
PAGINATION
This manual is divided into a number of sections, each Section deals with one aspect of
the system.
Following initial issue, any page that has been amended or updated will also bear an
updated reference.
Doc Number:
TNM-U-E-0114 ISSUE 1.4
Page
20