15
CAMERA OPERATION
camera’s system firmware. Press
Down
to return to the initial Setup
screen. You can also press
Setup
to exit the Info screens and return
the camera to normal operation at any time.
EXITING THE SETUP MENU (Both Models)
When you’ve finished using the Setup Menu, and are ready to return the
camera to normal operating mode, so it will begin to capture photos or
videos for you, simply press the
Setup
button. After you exit the Setup
Menu, the display will go blank and the camera is in “sleep” mode (
model
119318C showns “PIR test” countdown first)
. About 30 seconds later, the
camera will begin taking photos or videos when triggered, at intervals
determined by the trigger delay time setting.
CAMERA OPERATION
Once your camera has been setup, you are ready to begin using it to
capture photos of wildlife activity in the area you choose to locate it. Just
follow these steps:
Mounting the Camera
It is recommended that you mount the camera about 4 or 5 feet
•
(1.2~1.5 meters) off the ground, with the camera pointed at a slight
downward angle. It’s best to avoid mounting the camera facing
east or west as the rising and setting of the sun could produce false
triggers and overexposed images. Clear branches and other debris
away from the front of the camera so as not to block the camera
lens or PIR sensor.
To mount the camera in place, insert the strap through the strap
•
slots on the rear housing. Wrap the strap around the mounting
surface. Secure the strap and tighten the buckle in order to secure
the camera.
Make sure that both door latches are securely locked in place, to
•
ensure proper weather resistance. A standard padlock may be used
in the camera’s lock hole to secure it and prevent theft.
Содержание 119318C
Страница 2: ......
