SLFL Instructions – LED Sports Light
Simkar Lighting
700 Ramona Ave, Philadelphia, PA 215-831-7700
www.simkar.com
70-62938
6
Power wiring
Incoming power cable shall be a minimum of 18 AWG
annealed stranded bare copper per ASTM B-174.Cable
must be water resistant, UV rated/sunlight resistant, UL
listed and CSA certified for indoor and outdoor use.
1. Remove cover from line voltage input junction box at
the side of the fixture.
2. Route incoming power cable through cord grip in the
input junction box, provided.
3. Strip outer jacket of incoming power cable as
required. Connect the incoming power wires to the
fixture power wires on the side of the input junction
box.
4. Close the input junction box, note: 10Kv surge
protection is located inside the input junction box.
Fixture power and cable
Designation
Black
Line
White
Neutral
Green
Ground
