Simex SUR-W410, Руководство пользователя

Страница: 8 / 60

User manual - METER SUR-W410
- All installation works must be conducted with a disconnected power supply.
- Protecting the power supply connections against unauthorized persons must be
taken into consideration.
4.1. UNPACKING
After removing the unit from the protective packaging, check for transportation damage.
Any transportation damage must be immediately reported to the carrier. Also, write down the
unit serial number located on the housing and report the damage to the manufacturer.
Attached with the unit please find:
- user’s manual,
- warranty,
4.2. ASSEMBLY
- Disconnect the power supply prior to starting assembly.
- During installation all available safety requirements should be considered.
- The mounting method must to preserve high breaking strength, at least 4 times
the mass of the device.
- Check the connections are wired correctly prior to switching the unit on.
To install the device two holes must be prepared (distance like in Figure 4.1) with
screws or hooks. The device should be installed using its handles placed on the top
of housing.
Figure 4.1. Device and assembly dimensions
8
!
!
!
578 mm
554 mm
2
08
m
m
102 mm