Simex SRT-N118-XA, Руководство пользователя, Страница: 37 / 44

User manual - METER SRT-N118-XA
Register Write Range Register description
27h Yes 0 ÷ 99
“mbtO” parameter in “rS” menu (maximum delay between
received frames); 0 - no delay checking;
1 ÷ 99 - maximum delay expressed in seconds
2Dh Yes 1 ÷ 8
“ bri ” parameter (display brightness);
1 - the lowest brightness; 8 - the highest brightness
2Fh Yes 0 ÷ 1
“ Edit ” parameter (numerical parameters edit mode);
0 - „ dig ” mode; 1 - „ SLid ” mode
30h Yes -999 ÷ 9999 “ SEtP ” parameter in “ rEL1 ” menu, no decimal point included
31h Yes -999 ÷ 999
“ HySt ” parameter in “ rEL1 ” menu, no decimal point included
32h Yes 0 ÷ 5
“ modE ” parameter in “ rEL1 ” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode;
3 - “ in ” mode; 4 - “ out ” mode; 5 - “ modb ” mode
33h Yes 0 ÷ 999
“t on”
parameter in
“rEL1”
menu, expressed in tenth of
seconds or tenth of minutes depend on
“unit”
parameter - register no. 35h)
34h Yes 0 ÷ 999
“toFF” parameter in “rEL1” menu, expressed in tenth of
seconds or tenth of minutes depend on “unit”
parameter - register no. 35h)
35h Yes 0 ÷ 1
“unit” parameter in “rEL1” menu:
0 - seconds; 1 - minutes
36h Yes 0 ÷ 2
“AL” parameter in “rEL1” menu: 0 - no changes; 1 - on;
2 - off
37h Yes -999 ÷ 9999 “ SEt2 ” parameter in “ rEL1 ” menu, no decimal point included
38h Yes -999 ÷ 9999 “ SEtP ” parameter in “ rEL2 ” menu, no decimal point included
39h Yes -999 ÷ 999
“ HySt ” parameter in “ rEL2 ” menu, no decimal point included
3Ah Yes 0 ÷ 5
“ modE ” parameter in “ rEL2 ” menu:
0 - “ noAC ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode;
3 - “ in ” mode; 4 - “ out ” mode; 5 - “ modb ” mode
3Bh Yes 0 ÷ 999
“t on” parameter in “rEL2” menu, expressed in tenth of
seconds or tenth of minutes depend on
“unit”
parameter - register no. 3Dh)
3Ch Yes 0 ÷ 999
“toFF” parameter in “rEL2” menu, expressed in tenth of
seconds or tenth of minutes depend on “unit”
parameter - register no. 3Dh)
3Dh Yes 0 ÷ 1
“unit” parameter in “rEL2” menu:
0 - seconds; 1 - minutes
3Eh Yes 0 ÷ 2
“AL” parameter in “rEL2” menu: 0 - no changes; 1 - on;
2
- off
3Fh Yes -999 ÷ 9999 “ SEt2 ” parameter in “ rEL2 ” menu, no decimal point included
50h Yes 0 ÷ 1
“ modE ” parameter in “ HOLd ” menu (type of detected
changes):
0 - peaks; 1 - drops
37