Sime 8500240, Руководство пользователя

Страница: 16 / 29

Fonderie Sime SpA reserves the right to amend all of the product and relative accessories specifications without prior warning.
42
43
ENG
FR
SYSTEMS WITH 1 OR 2 COLLECTORS
1.
Tighten parts 1 and 2 using the provided screws and M8 nuts.
Repeat the same operation for the second coupling.
2.
Tighten vertical part 3 to the above parts.
3.
Tighten diagonal part 4 to the above parts and fasten all screws. Repeat steps 1, 2 and 3 for the other pairs of
parts.
4.
Cross position parts 6 of the Drawing and fasten the screws.
5.
For the two collector model, place the collector 5 support on the lower part; place the four fixing washers of the col-
lectors between the spaces of the parts, without fastening the M8 screws with nuts.
Part 5 is not required for the single collector model. The collector is fixed with the 2 fixing washers of collectors, as
described in figures 5a and 5b.
SUPPORT FRAME FOR FLAT ROOF
ATTENTION: After installation, check the collectors' surface has an inclination angle of 35
°
respect to the horizontal position.
2
1
3
4
6
5