Sime 300/5.44 S, Инструкции по установке и обслуживанию

Страница: 14 / 64

14
EN
3.3 General prevention measures
a
WARNING
– When installing solar thermal systems and the relati-
ve pipes, follow the accident-prevention instructions
and the safety rules.
– Keep the work area clean and free of objects that
could hinder the work operations.
– Do not allow children, animals and other people
from coming into contact with the tools or from ap-
proaching the work site. This rule must be observed,
especially when existing buildings are being re-
structured.
– Store the anti-freeze liquid in a safe place out of re-
ach of children.
– When maintenance works, assistance or changes
to the installation are being carried out, remove the
electrical devices and instruments of the current col-
lector or protect them against accidental activation.
– Exclusively use the tools intended for this specific so-
lar heating system. The use of other components or
inappropriate tools can lead to accidents.
Requirements relating to personnel
– Solar heating systems can only be installed by specialised
companies or trained personnel possessing the appropriate
authorisation.
– Works on electrical systems or conductors must be carried out
exclusively by trained and specialised electricians.
Personal protective equipment
– Wear safety glasses, an adequate work overall, safety footwear
and a protective helmet and, in case of long hair, an appropriate
mesh to gather them.
– Do not wear baggy garments or jewellery, as they could get
tangled in moving parts.
– If, despite the use of safety glasses, the anti-freeze liquid co-
mes into contact with the eyes, rinse them thoroughly with wa-
ter while keeping the eyes well open.
– Wear a protective helmet when performing installation works
at the level of the head or above it.
Installing the calorifier
– Use forklift trucks suited to the size and weight of the calorifier
for transporting, assembling and installing the device.
– Protect the enamelled surface against impacts that could oc-
cur during transport and installation.
– There is a risk of accidents due to the weight of the calorifier.
Make sure that the load-bearing capacity of the surface on
which the calorifier will be installed is adequate, also with the
calorifier full.
3.4 Protection against lightning
The metal parts of the entire system conform to the general re-
quirements of the ELOT 1197 standard and to the special requi-
rements regarding protection against lightning of the ELOT 1412
standard, which takes into account the environmental conditions
and the altitude.