background image

20119857

GB

Information and general warnings

2.1

Information about the instruction manual

2.1.1

Introduction

The instruction manual supplied with the burner:

is an integral and essential part of the product and must not
be separated from it; it must therefore be kept carefully for
any necessary consultation and must accompany the burner
even  if  it  is  transferred  to  another  owner  or  user,  or  to
another  system.  If  the  manual  is  lost  or  damaged,  another
copy must be requested from the Technical Assistance Ser-
vice of the area;

is designed for use by qualified personnel;

offers  important  indications  and  instructions  relating  to  the
installation  safety,  start-up,  use  and  maintenance  of  the
burner.

Symbols used in the manual

In  some  parts  of  the  manual  you  will  see  triangular  DANGER
signs. Pay great attention to these, as they indicate a situation of
potential danger.

2.1.2

General dangers

The 

dangers

 can be of 

3 levels

, as indicated below.

2.1.3

Other symbols

Abbreviations used

Ch.

Chapter

Fig.

Figure

Page

Page

Sec.

Section

Tab.

Table

2

Information and general warnings

DANGER

Maximum danger level!
This symbol indicates operations which, if not car-
ried  out correctly, cause  serious  injury,  death or
long-term health risks.

WARNING

This symbol indicates operations which, if not car-
ried out correctly, may cause serious injury, death
or long-term health risks.

CAUTION

This symbol indicates operations which, if not car-
ried out correctly, may cause damage to the ma-
chine and/or injury to people.

DANGER

DANGER: LIVE COMPONENTS

This symbol indicates operations which, if not car-
ried out correctly, lead to electric shocks with le-
thal consequences.

DANGER: FLAMMABLE MATERIAL

This symbol indicates the presence of flammable
materials.

DANGER: BURNING

This  symbol  indicates  the  risks  of  burns  due  to
high temperatures.

DANGER: CRUSHING OF LIMBS

This  symbol  indicates  the  presence  of  moving
parts: danger of crushing of limbs.

WARNING: MOVING PARTS

This  symbol  indicates  that  you  must  keep  limbs
away  from  moving  mechanical  parts;  danger  of
crushing.

DANGER: EXPLOSION

This symbol signals places where an explosive at-
mosphere may be present. An explosive atmos-
phere is defined as a mixture - under atmospheric
conditions  -  of  air  and  flammable  substances  in
the form of gases, vapours, mist or dust in which,
after ignition has occurred, combustion spreads to
the entire unburned mixture.

PERSONAL PROTECTION EQUIPMENT

These symbols indicate the equipment that must
be  worn  and  kept  by  the  operator  for  protection
against threats against safety and/or health while
at work.

OBLIGATION  TO  ASSEMBLE  THE  COVER
AND ALL THE SAFETY AND PROTECTION DE-
VICES

This symbol signals the obligation to reassemble
the cover and all the safety and protection devices
of the burner after any maintenance, cleaning or
checking operations.

ENVIRONMENTAL PROTECTION

This  symbol  gives  indications  for  the  use  of  the
machine with respect for the environment.

IMPORTANT INFORMATION

This  symbol  indicates  important  information  that
you must bear in mind.

This symbol indicates a list.

Содержание 20119424























Отзывы: