3. SPECIFICATIONS
Input Voltage
100-240 VAC, 50/60 Hz
Input Current
0.5A, 55W max (no heater); 3.5A, 420W (with 100-120 VAC heater); 1.9A, 460W (with
220-240 VAC heater)
Discharge
1
1.0 sec @ 1’ (30 cm) (1000-100V high fan speed)
Balance
0 ±10V
Coverage Area
3’W x 6’L (91 x 183 cm) (effective coverage area is up to 6’ from the blower face)
Ion Emission
Micropulse AC Ionization
Emitters
Stainless Steel emitter points
Controls
Power on/off, fan speed control low/medium/high, emitter point cleaner push button,
balance adjust, heater on/off (optional)
Indicators
Green POWER on, red FAULT alarm, red FAN STALL alarm
Connectors
IEC AC Power Cord outlet, FMS fault alarm output connector
Air Volume
95 cfm (low), 150 cfm (high fan speed)
Air Velocity
2
620 fpm @ 12”, 435 fpm @ 24”, 325 fpm @ 36”, 265 fpm @ 48” (high fan)
Heated Air Temp
4-5°F (2-3°C) above ambient, measured at 12” (30 cm) in front of blower (optional)
Audible Noise
58 dB (low fan speed), 70 dB (high fan speed) measured at 2’ in front of blower
Cleanroom Class
Meets ISO 14644 Class 6 (Fed Std. 209E Class 1000)
Ozone
<0.05 ppm measured at 1’ (30 cm) in front of the blower
Operating Env
3
Temperature 50-95°F (10-35°C), humidity 30-60% RH, non-condensing
Audible Alarm
Fault and fan stall (optional)
Mounting
Powder-coated steel stand with skid resistant rubber feet
Enclosure
Powder-coated aluminum chassis
Dimensions
14.13”W x 7.2”H x 6.55”D (35.9 x 18.3 x 16.6 cm) with stand
Weight
7 lbs (3.2 kg) with stand
Warranty
2 year limited warranty
Certifications
1. Tested in accordance with ANSI/ESD STM3.1-2015.
2. Velocity in fpm measured at center line of air stream; all values ±10%.
3. Will provide specified (to specification) performance when operated in an environment meeting the cleanliness
requirements for ISO Class 6.
6
Aerostat XC2
5201333 Rev. A
