MOON by Simaudio
Unpacking
The
MOON 390
should be removed from its box with care.
The following accessories should be included inside the box with your unit:
• AC power cable
• ‘CRM-3’ remote control with two ‘CR-2032’ batteries
• ‘SimLink™’ cable
• 2x Wi-Fi antenna
• Warranty and product registration information (USA and Canada only)
Please write the serial number of your unit in the space provided below for future reference.
Serial Number
Installation & Placement
The MOON 390 requires reasonable ventilation to maintain an optimum and consistent operating temperature
since it will radiate heat. Consequently, it should be placed in a location with empty space around it for proper heat
dissipation. Maintain a minimum of 4 inches of free space on each side and back and top. You should never place
another component on top of this unit nor block the vents. Air must be permitted to pass freely through. As well, it
should be placed on a solid level surface. You should avoid placing it near a heat source or inside a closed cabinet
that is not well ventilated as this could compromise its performance and reliability.
Once the unit is unpacked, inspect it thoroughly and report any damage to your dealer immediately.
We suggest that you keep all of the original packaging, storing it in a safe, dry place in case you’re required
to transport this product. The customized packaging is specially designed to protect the unit from any potential
damage during transit.
