Simaudio Moon 240i, Руководство пользователя

Страница: 8 / 28

8
Unpacking
The MOON 240i should be removed from its box with care.
The following accessories should be included inside the box with your integrated amplifier:
This owner’s manual
AC power cable
CRM-3 remote control with two CR-2032 batteries
1 spare fast-blow fuse
SimLink
TM
/ 12V trigger cable
Warranty and product registration information (USA and Canada only)
Please write the serial number of your new MOON 240i in the space provided below for future reference.
Serial Number

Once the 240i is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We suggest
that you keep all of the original packaging, storing it in a safe, dry place in case you’re required to transport this
product. The packaging is specially designed to protect the 240i from any potential damage during transit.
Installation & Placement
The 240i requires reasonable ventilation to maintain an optimum and consistent operating temperature since
it will radiate heat. Consequently, it should be placed in a location with empty space around it for proper heat
dissipation. Maintain a minimum of 4 inches of free space on each side and back, and 9 inches on top. You should
never place another component on top of this unit nor block the vents. Air must be permitted to pass freely through.
You should never place another component on top of this integrated amplifier. As well, it should be placed on a solid level
surface. You should avoid placing it near a heat source or inside a closed cabinet that is not well ventilated as this could
compromise its performance and reliability. The 240i uses a toroidal transformer; even though it is well shielded, you should
not place it too close to source components sensitive to EMI, such as turntables.

If you intend to use the MOON 240i’s USB input connection (PCM or DSD) with a Windows-based computer, you will
need to install our USB HD DSD driver, which can be downloaded from the support section of our website.
MacOS-based computers don’t require any drivers.