Simaudio Moon 240i, Руководство пользователя

Страница: 10 / 28

10
The “Setup” and “OK” buttons are used exclusively for pro-
gramming the numerous software functions available on
this integrated amplifier. The next section, entitled “Software
Setup”, explains their usage in full detail.
The “Phones” jack is used for connecting a pair of stereo
headphones to the 240i. The input connector is a stan-
dard ¼” stereo TRS jack. When a pair of headphones are
connected to the 240i, both the loudspeakers and the
preamplifier/subwoofer outputs will stop receiving a signal.
The rotary “volume” control ranges from ‘0.0’ (no output)
to ’80.0dB’ (full output). Within the 0.0 to 30.0dB range the
volume operates in 1.0dB steps. From the 30.0 to 80.0dB
range the volume operates in 0.5dB steps. When you adjust
the volume, only the volume level will appear on the center
of the display in a larger format:
The two (2) ANALOG inputs, “MP in” and “PHONO” inputs will
only display their input name and volume level when active:
Phono Input
The MOON 240i is equipped with one analog “PHONO”
input for use with turntables equipped with a moving
magnet (MM) cartridge ONLY. You must remember
to connect your turntable’s grounding cable
to the grounding screw on the 240i’s rear panel; Refer
to the section “Rear Panel Connections” for details.
Digital Inputs
The 240i has a total of five (5) “Digital Inputs”:
one (1) “USB”, two (2) optical and two (2) SPDIF.
The digital inputs – both “OPTICAL”, both “SPDIF“, and
“USB” will show the input name, sampling rate and
volume level in the display window:
When the 240i cannot lock onto selected digital in-
put’s signal, “NO SIGNAL” will appear in the display
instead of the sampling rate:

Unlike all other inputs, the “MP In” (for Media
Players) has its corresponding input connection
located on the front panel for easy access. It uses a
1/8” mini-jack connector which is the most common
type of connection found on portable media players
and most smart devices.