Simaudio 740P evolution series, Руководство пользователя

Страница: 19 / 20

Owner’s Manual
19
Specifications
Configuration Fully balanced, dual-mono
Balanced inputs (XLR) 2 pairs
Single-ended inputs (RCA) 3 pairs
Input Impedance 22,000
Ω
Input Sensitivity 200mV – 4,0V RMS
Balanced outputs (XLR) 1 pair
Single-ended outputs (RCA) 2 pairs (fixed and variable)
Output Impedance 50
Ω
Gain Control M-eVOL2
Gain 9dB
Signal-to-noise Ratio 120dB @ full output
Frequency Response 5Hz - 0/-0.1dB
Crosstalk @ 1kHz 116dB
Intermodulation Distortion 0.0003%
THD (20Hz - 20kHz) 0.001%
Remote Control All Aluminum Full-Function (FRM-3)
Display Type 8 character dot matrix LED
Power Consumption @ idle 20 Watts
AC Power Requirements 120V / 60Hz or 240V / 50Hz
Shipping Weight 35 lb. / 16 Kg.
Dimensions (W x H x D, inches / cm.) 18.75 x 4.0 x 16.5 / 47.6 x 10.0 x 41.9
Balanced Input Pin Assignment:
Pin 1 Ground
Pin 2 Positive
Pin 3 Negative
NOTE: If you require the RS-232 codes for your 740P , please visit the "Contact Us" page
and complete the "Information request" form on our website at www.simaudio.com .
Fuse Replacement: For the 120V version use a 0.2A slow blow (5 x 20mm size).
For the 230V version use a 0.1A slow blow (5 x 20mm size).