E
N
SC
3
0
3
&
S
C
5
0
3
8
Dimensions
120 x 120 x 60mm
4.72 x 4.72 x 2.36in
Battery connection
M10 bolts
7. Troubleshooting
7.1 Negative current values
If PICO is showing the wrong sign for the current value, check if the shunt is
correctly installed. This means the battery/battery bank minus (optionally plus)
terminal is connected to the IN terminal on the shunt. If this is not the case, you
can reinstall the shunt or simply switch the IN and OUT terminal via the shunt
configuration on the PICO unit.
7.2 Shunt is not visible on PICO
If the shunt is not visible on PICO's menu, check the following:
·
Is the shunt properly connected via the SiCOM port to the PICO
·
If you are using your own SiCOM cable make sure it has the right square and is
twisted.
·
Check if the voltage sensing input is correctly installed and doesn't have the
plus and minus terminal switched
