Page
12
of
12
Step 19
: Connect your wheel to the
Thrustmaster base via the “quick” disconnect
as you normally would.
Step 20
: Connect the 6-pin plug from your
paddles to either the 6-pin stand alone
connector, or the optional connector box.
Step 21
: Connect the clear RJ-11 style clip
connector to your Thrustmaster base where
the stock Thrustmaster pedals would
normally plug in.
Note: If you’re using the optional connector
box with a DSD or Bondar 12-bit controller
then connect the controller board to USB
instead.
Step 22
: Turn the wheel on and go driving!
Please reference Thrustmaster’s instructions
for driver installation and calibration. Same
goes for in-game calibrations. Your SimAbility
paddles will emulate Thrustmaster pedals and
should be calibrated the same.