Page 15
Securing the Screen to the Ground
Use the ground stakes & tie down ropes to secure the screen. Attach the tie down ropes to the screen using the 4
attachment points located on the upper portion of the frame. If the ground stakes are unable to be used, apply the
rope ties to a secured object such as a sand bag to hold down the screen as shown below. Be sure to use an object
of sufficient weight (approx. 25 lbs) to secure the screen. Make sure the weighed object does not have sharp edges
that could tear or puncture the screen.
WARNING: KEEP AWAY FROM WATER. DO NOT PLACE OR STORE THIS WHERE THIS UNIT CAN FALL OR
BE PULLED INTO WATER. ALWAYS USE GFI OUTLETS FOR THE AIR PUMP AND SPEAKERS IF USED
OUTDOORS.
KEEP ALL ELECTRICAL PARTS AND EXTENSIONS CORDS DRY. ALWAYS UNPLUG FIRST
FROM THE ELECTRICAL OUTLET.
•
Warning: This screen can withstand winds up to 15mph. higher wind speeds will cause disruption in
viewing or the grommets to tear off. Deflate screen in excessively windy or severe storm conditions.
•
Warning: Always survey the ground before staking the equipment. Electrical hazards may exist
underground. Overhead power lines may exist; always look-up and survey the electrical hazards above.
