Sima AMBAR 200, Оригинальное руководство пользователя

Страница: 28 / 52

ENGLISH
-12-
The machine is not aligned Align
blade deteriorated or worn-out Change blade
Defective cutting
Inappropriate blade Use appropriate blade for material
blade oscillation
Check the state of the disc and mount it
correctly
blade subjection defect
Make sure the bridles and the motor axis
are well adjusted. Tighten well the nut.
Vibrations
occurrence
Wrap the blade Change the blade
13. TECHNICAL CHARACTERISTICS
DESCRIPTION
AMBAR 200
Exterior blade diameter (mm.)
200
Interior blade diameter (mm.)
22,2
Cutting length (mm.)
600
Cutting depth (mm.)
35
Motor power
0,80Kw
Motor tension
230V~
motor R.P.M.
2980
Water pump power
10 w
Water pump tension
230V~
Motor and pump frequency
50Hz
Net weight (Kg.)
32
Long
900
Wide
450
Dimensions (mm.)
High
950
Water tank capacity (L.)
24
14. WARRANTY
SIMA, S.A. the manufacturer of light machinery for construction possesses a net of technical services “SERVI-
SIMA”.
Repairs under warranty made by SERVÍ-SIMA are subject to some strict condition to guaranty a high quality
and service.
SIMA S. A. guarantees all its products against any manufacturing defect; to take into account the conditions
stated in the attached document “WARRANTY CONDITIONS”. The latter would cease in case of failure to comply with
the established payment terms. SIMA S.A. reserves its right to bring modifications and changes to its products without
prior notice.
15. SPARE PARTS
The spare parts for the cutting table, model AMBAR 200, manufactured by SIMA, S.A. are to be found in the
spare parts plan, attached to this manual.
To order any spare part, please contact our alter-sales service clearly indicating the serial number of the
machine, model, manufacturing number and year of manufacturing that show on the characteristics plate.