Sim2 SVD800 HD Millennium, Руководство по обслуживанию

Страница: 27 / 43

SVD800HD
SERVICE GUIDE
page - 27 -
RESTORE PRESET
This function is useful to restore the colour temperature of the three sets adjusted in Factory at 3200°K, 6500°K and
9300°K when have been changed in User mode.
Note. When change the colour temperature set into WHITE MENU will change the Factory setting.
From the WHITE BALANCE menu select RESTORE PRESET, using the
↑ ↑
or
↓ ↓
cursor button, and press the ENTER
button. The following indication will appear.
WARNING !
RESTORE OLD XXXX°K TEMP ?
Press ENTER to confirm, will appear:
OLD DATA RESTORED !
CUT-OFF TIMING
This menu permits to determine the condition of the automatic cut-off.
From the WHITE BALANCE menu select CUT-OFF TIMING using the
↑ ↑
or
↓ ↓
cursor button and press the ENTER
button. The following menu will appear.
- CUT-OFF TIMING
FIRST CUT-OFF AFTER 20
SECOND CUT-OFF AFTER 40
CUT-OFF EVERY 10
NUM CYCLES 100
CUT-OFF ENABLE NO
CUT-OFF WINDOW OFF
Use the
↑ ↑
or
↓ ↓
cursor button to select the item
and
←
or
→ →
button to change the value of the selected item.
•
FIRST CUT-OFF AFTER: may be changed from 02 to 30 min.
•
SECOND CUT-OFF AFTER: may be changed from 02 to 30 min.
•
CUT-OFF EVERY: may be changed from 02 to 30 min.
•
NUM CYCLES: may be changed from 050 (~2 sec.) - 100 -150 - 200 till 250 (~ 10 sec.).
•
CUT-OFF ENABLE: ON or OFF (when ON permits all cycles)
•
CUT-OFF WINDOW: ON or OFF