Sim2 NERO 4S UHD, Руководство пользователя, Страница: 36 / 64

Signal
Press the
↵
to enter the menu and then use
▴
or
▾
to select item. This function is
available only for analog input signal (RGB or Component) and permit to adjust the
signal options.

Automatic
Configure automatically the signal (the frequency and phase items are grayed
out). If automatic is disabled, the frequency and phase items will appear for tuning
and saving the settings.

Frequency
Change the display data frequency to match the frequency of your computer’s
graphic card. Use this function only if the image appears to flicker vertically.

Phase
Synchronize the signal timing of the display with the graphic card. If the image
appears to be unstable or flickers, use this function to correct it.

H. Position
Adjust the horizontal positioning of the image.

V. Position
Adjust the vertical positioning of the image.

Exit
Exit from the “Signal” menu.
Lens Iris
Press the
↵
to enter the menu and then use
▴
or
▾
to select item.
This function adjust the lens iris.
Press
◂
to decrease the Iris
Press
▸
to increase the Iris
Range [1 .. 12]
Dynamic Contrast
Press the
↵
to enter the menu.
Dynamic Contrast enables the projector to automatically optimize the brightness of
the display during dark / light movie scenes to be shown in incredible detail.
Press
◂
or
▸
to select its status.
Range [On, Off]
NERO 4 S
User Guide
36