Sim2 NERO 4S UHD, Руководство пользователя, Страница: 28 / 64

To select menu items press
◂ ▸
on the remote control. To turn off the main menu
press on the remote control. Use
◂
,
▸
to change settings on a selected item.
Note: Depending on the selected input source and signal characteristics, some adjust-
ments may not be available.
Display and Setup menu sections provide access to most commonly-used projector
adjustments. Note that, in Display menu:

you can enter these sections only when an image is displayed;

the controls in these sections only operate on the active input;

when you select another input all the settings in these sections are automatically
saved;
 each time you select an input the previously saved settings for that input or mode
will be automatically recalled;
Setup section provide access to installation and OSD adjustments. The settings in
these sections are global (for all inputs and modes, not just the active one).
Live Colors Calibration software (LCC)
To aid calibration, the NERO 4 S projector, feature the new SIM2’s advanced Live Colors
Calibration 2.0 software that enables professional calibration of many projection pa-
rameters such as complete adjustment of the primary, secondary and white point
color coordinates. This PC-based software gives calibration experts unprecedented
control over the projector image quality.
SIM2 recommends the use of LCC software to calibration experts only, by using spec-
trophotometers or color probes to correctly analyze and adjust the colorimetry.
Any NERO 4 S is factory adjusted to reach the HDTV REC709 standard in SIM2
premises: selecting Display Mode “Natural”, Color Gamut “HDTV” and Color Tempera-
ture “D65”. These setup reproduce, as close as possible, the image the way the movie
director intended; colors, color temperature, brightness and gamma settings are all
configured to standard reference levels. However, some fine tuning would be neces-
sary to adapt NERO 4
S to your screen, environment and sources.
NERO 4 S
User Guide
28