Sim2 NERO 4S UHD, Руководство пользователя, Страница: 24 / 64

Control
You can connect the NERO 4 S projector to a Personal Computer or a control system
through one of the following methods:
 RS-232 port, using a standard 9-pin straight serial cable
 RS-232 port, using a USB to serial converter cable. In this case, installation of a
device driver provided by the cable manufacturer may be required.
Note: RS-232 communications are limited to max 15 m (50 ft.), VGA communication
are limited to max 20 m (65 ft.), HDMI communication are limited to max 20 m (65
ft.), CVBS & YPbPr are limited to max 20 m (65 ft.).
Triggers
Some Home Theater devices can be controlled through a 12 V signal. The projector
can output two 12 V (150mA
±10%
) signals:

12V TRIG A provides a standard trigger for motorized screens control

12V TRIG B provides a trigger for motorized screen.
USB
USB-A for 5V, 1.5A for service functions.
AC Power
Plug the female end of the power cord to the AC receptacle located on the left hand
side of the projector (100-240 V AC, 50-60 Hz) and the other end into a grounded AC
outlet. An high-quality surge protector is recommended while a UPS is optional.
NERO 4 S
User Guide
24