1.
Let the product hanger wires (2) through hanger plate (3). As
this is done, the feeder cable passage area (5) should be on
the right side when the appliance is viewed from the front
2.
Let the product hanger wires (2) through hanger lock mecha-
nism (1) lock mechanism. Ensure all hanger wires are
required length and equal (Fig. 12).
CAUTION!
The locking mechanism of the carrier wires will
prevent the wires to move away from its position or
backwards as long as the stop pims are not
pressed forward.
Fig. 13
1
Fixing plate
2
Securing bolt
3
Fixing bolts
4
Feeding Cable
1.
Mount 4 ceiling hanger locking mechanism (1) on the body
with 3.5 x 9.5 screws (2) and M5 x 15 (3) screws (Fig. 13
2.
Let the feeder cable (4) through the ceiling hanger plate
feeder cable through area (Fig. 13/5) and make the electrical
connections. Close the ceiling hanger plate cover.
ASSEMBLY OF PRODUCT
Installation Diagram and Components
28.03.2019
HOOD USER GUIDE ENGLISH
21