
24
If your dishwasher requires filling with salt,
the display will show and flash
"SL"
when
the dishwasher is switched on. The
appearance of white stains on dishes is
generally a warning sign that the salt
container needs filling.
Dishwasher start time can be set with this
button, delaying start from 1 to 23 hours.
Proceed as follows to set a delayed start:
Press the
"DELAY START"
button (
"00"
will appear on the display).
Press the button again to increase the
delay in hours (each time the button is
pressed the delay is increased by 1 hour
to a maximum of 23).
To start the countdown, press the
"START"
button. The display will show
the time remaining to the begin of the
programme. At the end of the countdown,
the programme will automatically start
and the length of the selected cycle will
be shown in the display.
Proceed as follows to cancel a delayed
start:
Hold the
"RESET"
button down for at
least 3 seconds.
"00"
will appear on the
display and some audible signals will
sound.
The delayed start and the selected
programme will be cancelled. The display
will show two lines.
At this point, a new programme and
option buttons must be set to start a new
programme as indicated in the
"PROGRAMME SETTINGS"
section,
The alarm for the programme end may be
muted as follows:
1.
Hold down the
"PROGRAMME
SELECTION"
button and at the same
time switch on the dishwasher by
pressing the
"ON/OFF"
button (a brief
audible signal will sound).
2.
Keep the
"PROGRAMME SELECTION"
button pressed for at least
15
seconds
(during this time,
2
audible signals will
sound).
3.
Release the button when the second
audible signal sounds ("b1" will appear
on the display to indicate that the alarm
is on).
4.
Press the same button again ("b0" will
appear on the display to indicate that
the alarm is off).
5.
Turn off the dishwasher by pressing the
"ON/OFF"
button to confirm the new
setting.
To turn the w the same procedure.
The last programme used can be memorised
by following the procedure below:
1.
Hold down the
"PROGRAMME
SELECTION"
button and at the same
time
turn on
the dishwasher using the
"ON/OFF" button
(a brief audible
signal will sound).
2.
Keep the
"PROGRAMME SELECTION"
button pressed for at least
30
seconds
(during this time,
3
audible signals will
sound).
3.
Release the button when the
THIRD
audible signal sounds ("A0 " will appear
on the display to indicate that the
memorization is off).
The dishwasher must ALWAYS be off
before start of this procedure.
Memorising of the last programme
used
The dishwasher must ALWAYS be off
before start of this procedure.
Alarm mute for the
PROGRAMME END
"DELAY START" button
Salt empty alert
Содержание D11039S03
Страница 1: ...MODEL D11039W03 D11039S03 BULA IK MAK NES KULLANIM KILAVUZU www silverline com DISHWASHER USER MANUAL...
Страница 42: ......
Страница 43: ...MODEL D11039W03 D11039S03 DISHWASHER USER MANUAL www silverline com...
Страница 79: ......