Silverline D11039S03, Руководство пользователя

Страница: 64 / 80

22
15. PROGRAMME SELECTION
AND SPECIAL FEATURES

Open the door and place the dirty dishes
inside the appliance.

Press the "ON/OFF" button for about
2 seconds . The display will show two
lines
 Choose a programme by pressing the
" PROGRAMME SELECTION " button.
 If you wish to select an option, press the
corresponding button (the indicator light
will turn on).
The option buttons can be selected or
deselected WITHIN one minute of The
programme commencing
.

Press the "START" button The length of
the program will be shown on the display
alternating hours with minutes [I.e: 1 h (1
hour) / 25 (25 minutes)].
 When the door is shut, after an audible
signal has sounded, the programme will
start automatically. The display will show
the time remaining to the end of the cycle.
WITHIN one minute of the programme
commencing, another programme can
be selected, simply by pressing the
"PROGRAMME SELECTION" button.
The "IMPULSE” programmes use an
impluse washing technology, which reduces
consumption, noise and increases
performances.
Opening the door when a programme is
running is not recommended especially
during the main wash and final hot rinse
phases. However, if the door is opened
while a programme is running (for example,
to add dishes) the machine stops
automatically. Close the door, without
pressing any buttons . The cycle will start
from where it left off.
Proceed as follows to change or cancel a
running program:
 Hold the
"RESET"
button down for at
least 3 seconds. "00" will appear on the
display and some audible signals will
sound.

The running programme will be cancelled.
The display will show two lines.

At this point a new programme can be set.
WARNING:
Before starting a new programme, you
should check that there is still detergent
in the dispenser. If necessary, top up the
dispenser.
Changing a running programme.
WARNING:
If you open the door during the drying
cycle, an audible audio signal advises
you that the drying cycle has not yet
finished.
IMPORTANT
A running program can be interrupted
without opening the door by pressing
the "ON/OFF" button. In
this case, simply press the "ON/OFF"
button again to restart the cycle from
where it left off.
Programme interruption
IMPORTANT
The “intermittent” working of the
washing pump MUST NOT BE
considered a malfunction, it is a
characteristic of the impulse washing
so must be considered a normal
function of the programme.
"IMPULSE" programmes (only
on some models)
Programme settings.