www.silverlinetools.com
5
190218
Protect yourself from vibration
•
Hand held power tools may produce vibration. Vibration can
cause disease. Gloves to keep the operator warm may help
to maintain good blood circulation in the fingers. Hand held
tools should not be used for long periods without a break.
Maintain your power tool
•
Ensure all ventilation holes are kept clear at all times.
Overheating and fire may otherwise result.
Always Disconnect
• Before changing fittings or accessories, always ensure that
your tool is disconnected from the power source.
Switch off before connecting
•
Ensure that the power tool is switched off before connecting
to the power source. If the power tool stops unexpectedly,
turn the power switch to off.
Do not abuse the power cord
•
Be sure your cable or extension cable is in good condition.
Always have a damaged cable or extension cable replaced
at an authorised service centre before using it. Never yank
or pull the cable to disconnect it from the power socket.
Never carry your tool by its cable. Keep the cable away
from damp, heat, oil, solvents, and sharp edges.
Don’t leave the tool running unattended
•
Always wait until your tool has completely stopped
functioning, and has been unplugged, before leaving it.
Pressure Washer Safety
• Never direct the water jet at people or animals. The water
jet is extremely powerful, and can cause serious injury. Do
not direct the water jet towards the pump body, or other
electrical equipment.
• Always connect a continuous flow clean water supply to the
pressure washer. Running the pressure washer dry, or with
dirty water, will cause permanent damage to the pump.
•
Ensure that the water supply to the pressure washer is
at a constant pressure. If the water supply is “shared” by
another appliance (e.g. washing machine), ensure that the
other appliance is switched off.
•
Handle the lance with care. Do not allow the nozzle to strike
the ground. Do not allow the hoses to be twisted, crushed,
or strained.
•
Be aware that the lance will produce a recoil force when the
pressure washer is operated. Hold the lance securely.
•
The pressure washer should always be used in an upright
position.
•
Do not attempt to use this machine in temperatures below
0˚C.
•
Do not operate this machine in the rain. Keep all electrical
connections dry. Do not allow the machine to become wet.
Never allow water to enter ventilation holes.
• Never connect the pressure washer to a hot water supply,
this will cause the pump to malfunction and could result in
permanent damage.
•
Take care to prevent any hazardous materials from
being washed into the ground. Always dispose of waste
responsibly. Do not attempt to pressure wash any material
suspected to contain asbestos.
Pressure Washer
1
Nozzle
2
Lance
3
Hose Connector
4
Water Inlet
5
On/Off Switch
6
Handle
7
Trigger
8
Safety Button
9
High Pressure Outlet
10 High Pressure Hose
11 Cleaning Pin
12 Detergent Bottle
Product Familiarisation
190218_Manual.indd 5
14/10/2010 09:23