SilverCrest SWKD 2400 A1
36 - English
8.3. Storing the device when not in use
If the kettle will not be used for a longer period of time, store it in a clean and dry place.
Let the pot (3) cool down fully before you store it.
Wrap the power cable (6) around the cable rewind under the base (5) and store the kettle in a
safe, dust-free place.
9. Troubleshooting
If your kettle does not work as usual, use the following instructions to try and solve the problem. If
working through the following tips does not eliminate the fault, please contact our hotline (see the
‘Warranty information’ section).
The kettle is not working
The plug is not inserted. Insert the plug into the power socket.
The power socket is faulty. Try the appliance in another power socket which definitely works.
The pot (3) is not switched on. Press the on/off button
(9) in order to switch on the pot (3).
The pot (3) has overheated and the overheating protection is preventing the device from
switching on. Wait until the pot (3) has cooled down completely. Fill the pot (3) with at least
0.5 l of water (up to the ‘0.5 l MIN’ mark).
The pot (3) is not properly placed on the base (5). Place the pot (3) on the base (5) properly
and press the on/off button (9) in order to switch on the pot (3).
The target temperature can only be set to a maximum of 90°C when using the
keep-warm function.
This does not indicate that the kettle is defective. The temperature range of the keep-warm
function is 40°C to 90°C.
Содержание SWKD 2400 A1
Страница 1: ......
Страница 2: ......
Страница 3: ...V 1 2 Deutsch 2 English 21 Français 40 Nederlands 61 Česky 80 Español 99 Português 118 ...